Anvil & Arc
(772) 555-0117
Mobile Welding & Fabrication · Vero Beach, FL

We come
to you.

Broke steel doesn’t wait. Neither do we.

MIG · TIG · StickSteel · Stainless · AluminumOne rig — one welder
01 — What we weld

If it’s metal,
we can fix it.

01

Marine & Boat

Docks, rails, towers, leaning posts. Salt-water tough, welded to hold.

MIG · Steel
Welding a steel dock gate at the water
02

Trailers & Hitches

Cracked frames, busted hitches, bent tongues — fixed where it sits.

MIG · Steel frame
Trailer frame clamped with a fresh bead half laid
03

Gates & Fences

Iron gates, farm fencing, security bars. Hung straight, welded solid.

Stick · Iron
Finished steel gate hung straight on a dock
04

Heavy Equipment

Buckets, booms, brackets, and busted mounts. We keep your iron working.

Stick · Heavy steel
Grinder throwing sparks on heavy steel
05

Aluminum & Stainless

Clean TIG work on aluminum and stainless. Done right, not just done.

TIG · Aluminum
Macro of a clean TIG weld bead
06

Emergency Repairs

Dead in the water at the worst possible time? We roll out and get you moving.

We roll · MIG · TIG · Stick
Welder at work in amber glow at dusk
Metal broke? We come to you.
Call (772) 555-0117
02 — The work

The work,
in three frames.

Every job tells the same three-frame story: how it came to us, the arc that fixed it, and how it left. Drag the divider — see it solid.

01

The Marina Gate

Salt eats a dock gate from the hinges out. This one sagged, dragged, and held shut with a chain. We cut the rot out, re-hung it plumb, and burned the hinges back solid — swings true, latches clean.

Weathered dock gate sagging with a chain at the latch
Broke
Arc welding the dock gate hinge at the water
Arc
Dock gate re-hung straight and finished
Solid
Finished marina gate after weldingArcSolid
SteelStick / MIGOn-site at the dockOne visit
02

The Trailer That Almost Retired

A tongue joint lets go the way they always do — slow, then all at once. We cut back to good steel, plated the joint, and laid bead until it was stronger than the day it was built.

Weathered trailer coupler and tongue, rusted
Broke
Trailer plate clamped with a fresh bead half laid
Arc
Rebuilt trailer tongue with fresh welds
Solid
Rebuilt trailer tongue after weldingBrokeSolid
Steel frameMIGDriveway jobSame day
03

The Stainless Rail

Coastal air pits stainless and works every joint loose. This rail got fresh TIG joints and a mirror finish — clean work you can run a hand down, with the ocean still in the frame.

Pitted stainless rail joint on stone steps by the sea
Broke
Small TIG arc on the stainless rail
Arc
Polished stainless rail finished on the steps
Solid
Finished stainless rail after TIG weldingArcSolid
316 StainlessTIGFitted on siteMirror finish
04

The Bucket, Rebuilt

A bucket edge wears a little thinner every load until the corner goes. We cut the worn steel out, clamped in a new edge, and burned it home heavy. Back on the machine and back to work.

Worn excavator bucket edge resting on timbers
Broke
Welder burning a new edge onto the bucket corner
Arc
Rebuilt bucket corner with heavy fresh beads
Solid
Rebuilt bucket after weldingArcSolid
Heavy steelStickJobsiteBack to work next morning
03 — How it works

Simple as
a phone call.

The workshop at first light
01

You call

Tell us what’s broke and where it is. That’s the whole estimate process.

Welding rig on a work truck at dusk
02

We roll out

The rig comes to you — driveway, dock, jobsite, or roadside.

Arc striking on site
03

It’s welded

Fixed on the spot. Stronger than it was before it broke.

Fixed on the spot. Stronger than it was before it broke.

One call. We roll. It’s welded.

04 — Who we are

Old school.
On wheels.

No shop. No waiting room. No hauling it across town.

One rig, one welder, one job at a time. Anvil & Arc brings the whole shop to your driveway, your dock, or your jobsite — MIG, TIG and stick, set up where the work is.

No fancy office. No runaround. Just show up, burn rod, and leave it solid. That’s the idea: a mobile shop that comes to you.

Leave it solid.
Welding rig on a work truck at dusk
Close-up of a glowing fresh weld bead
One rig · One welder · Vero Beach, FL
Finished weld, cooled to steel blue
05 — Word of mouth
ONE RIG
MIG · TIG · Stick

Mobile welding · Vero Beach, FL

No ads. No call centers. Just neighbors
telling neighbors.

One rig, one welder — we show up, we weld it, we leave it solid.

Got something
broke?

(772) 555-0117 Tap to call — we come to you

Mobile Welding & Fabrication · We come to you · Vero Beach, FL

Tap to call — (772) 555-0117